Accessories

Inductive conductivity probes read chemical concentration levels by running a magnetic field from two charged coils that are encapsulated in PVC.

This probe is not affected by scaling caused by hard water minerals. They are consistently precise, can measure a high conductivity level and have an integrated temperature sensor.

An alarm can be set, to stop the pump running if the concentration cannot be reached in a set period of time. This probe has a range of 0-250mS with a 10uS response. The tank temperature can be displayed on BrightLogic units due to a built in thermistor.

For use with D1, D2 and DH2 units.

Capacitive (coupled) conductivity probes consist of electrodes which are in direct contact with the solution. Conductivity measured between these elements is directly proportionate to the solution concentration. This probe has a range of 0 - 8.5mS.

It is rugged and low cost, but requires periodic cleaning to maintain its accuracy.

All BrightLogic dishwash dosing systems can be set with a conductivity probe (Inductive or capacitive) quickly and efficiently. Each probe is supplied in kit form with pre- installed connectors, cable gland and a buzzer.

An alarm can be set, to stop the pump running if the concentration cannot be reached in a set period of time.

For use with D1, D2, DH2 and MicroPlus II units.

Capacitive (coupled) conductivity probes consist of electrodes which are in direct contact with the solution.

SI 9012 is a compact, robust and inexpensive probe that is easy to install and maintain.

We recommend SI 9012 for usage with the SI 2102 dosing device, but the probe can also be used with the most common types of capacitive conductivity dosing devices.

GRI Pump

Dosing pump for, among other things, automatic dosing of liquid machine dish soap. Suited for use with SI 2102 dosing device.

Capacity up to 1.3 litre/minute. Available for both Leveres til både 24 og 230 Volt AC.